Visit us: 1761 Route 34 South Wall, NJ 07727
Over 60 years of service to the world
45105 - Paragon - Xpress-E Kiln (E-10A)

45105 - Paragon - Xpress-E Kiln (E-10A)

$1,245.45

45105 In Stock!

Chamber: 8.5"X8.75"x9"
UPS/FedEx-able

*NOTE: This item is special order and will ship within 4-6 weeks.

- +

Information

Reviews

Ideal for enameling, china painting, glass art and jewelry. The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller. Because this model no longer has the side-mounted switch box, it saves tabletop space.

Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door.

The door opens smoothly on a heavy-duty 1/2” hinge shaft. The firebricks store heat for quick temperature recovery after removing a copper enameling piece.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.

  • Design programs with up to 8 segments (steps) in Ramp-Hold mode.
  • Fire to a single temperature at a single speed in the simplified Single Speed mode.
  • Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Add Hold Time during firing without having to stop the kiln to reprogram.
  • Control both heating and cooling in Ramp-Hold.
  • Program Review lets you check the program you are about to fire.
  • Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
  • Temperature display throughout firing and cooling in your choice of °F or °C
  • Thermocouple Offset adjusts the thermocouple readout.
  • Set the Delay to turn on the kiln later to suit your schedule.
  • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
  • LED Lights show whether you are in program, review, or firing mode.

Shipping Available UPS/Fedex

Furniture Kit Includes:

1 C-7 (7" square x 5/8") Shelf

4 - 1/2" long, 1" wide Square Posts

1 lb. Bag of Kiln Wash

Kiln:
- Paragon - Xpress-E series,
- Ideal for enameling, silver clay, glass, & beads.
Model Number: Xpress-E-10A.
Firing Chamber: 8-1/2" W. x 8-3/4" H. x 9" D.
Outside Measurements: 14" W. x 18" D. x 20-1/2" H.
Max. Temp.: 2250ºF.
Cu/Ft.: 0.39.
Volts: 120V.
Amps: 15A.
Watts: 1800.
Min. Wire Size: 14.
Breaker Rating: 15A.
Receptacle: NEMA 5-15P.
Features:
- Front control panel tilted for easy operation of Sentry Xpress 3 key digital controller,
- Controller has 8 segment ramp-hold, delay fire, hold, skip segment, & program review options,
- Electrical components mounted to secondary steel base plate away from firing chamber,
- On/off switch,
- 2-1/2" insulating refractory firebricks,
- Durable steel case,
- Steel floor pan supports entire firebrick bottom,
- Heating elements easy to replace,
- Built-in base stays cool during extended holds; slots in base dissipate the heat,
- Tapered door peephole with steel cove,
- Unlatch & open door easily with one hand,
- No extra stand needed.
Warranty: 2 year limited warranty.
Shipping Weight: 71 Lbs. (approx.)
Special Ordering: 
- Special ordering available if kiln not in stock.
- Allow 4-6 weeks delivery.

All furniture kits sold separately, contact info@rainbowartglass.com for pricing

Write your review

45105 - Paragon - Xpress-E Kiln (E-10A)

Chamber: 8.5"X8.75"x9"
UPS/FedEx-able

*NOTE: This item is special order and will ship within 4-6 weeks.

Write your review